Since their introduction more than 30 years ago, Audio-Technica’s OC9 Series moving coil phono cartridges have been acclaimed by listeners and reviewers worldwide for their exceptional sound quality and musical transparency. At CES 2020 Audio-Technica will be exhibiting its AT-OC9X Series, the latest generation of this legendary range of cartridges.
The OC9X Series cartridges will be on exhibit at CES 2020 at the Las Vegas Convention Center, South Hall 1, Booth 20648 (January 7 – 10, 2020).
“When the first AT-OC9 cartridge was introduced in 1987 it combined previously unavailable engineering innovations with carefully chosen materials to achieve a breakthrough in sound quality,” said Yosuke Koizumi, Chief Engineer of Cartridges at Audio-Technica Japan. “Since then, we have continued to improve the cartridges. Our latest AT-OC9X Series embodies the culmination of over 50 years of cartridge manufacturing experience to deliver new levels of record-playback quality and musical enjoyment.”
Each OC9X model features a Dual Moving Coil structure, which enables the audio information in the record grooves to be separated to the left and right channels with pinpoint accuracy. This improved channel separation results in a more precise stereo image and wider frequency response.
AT-OC9X Series cartridges are available with a choice of stylus types including Special Line Contact (AT-OC9XSL), Shibata (AT-OC9XSH), micro linear (AT-OC9XML), nude elliptical (AT-OC9XEN) and bonded elliptical (AT-OC9XEB). The Special Line Contact, micro linear, and Shibata stylus models have been upgraded with a boron cantilever, while the nude elliptical and bonded elliptical models feature an aluminum cantilever. These materials were carefully selected to keep unwanted vibrations to a minimum and to reduce internal resonances for clearer, more detailed audio reproduction.
The moving coil wires in all OC9X Series cartridges are made from PCOCC (Pure Copper by Ohno Continuous Casting), for optimum signal purity. The Special Line Contact, micro linear and Shibata models utilize a neodymium magnet with a Permendur yoke, a configuration that provides high-saturation magnetic flux density and optimizes the concentrated magnetic field of the coil gap, for improved reproduction of the delicate musical signals generated by the cartridges. The nude and bonded elliptical models employ a neodymium magnet and iron yoke, which provide increased output compared to previous designs.
For all OC9X Series cartridges, the transducer engine is mounted onto a rigid aluminum body to help reduce unwanted internal vibrations and maintain sonic clarity. The cartridge bodies are pre-threaded, enabling them to be easily mounted to a headshell or tonearm with just two screws (no mounting nuts for the screws are required). Each OC9X Series cartridge is supplied with mounting hardware, a stylus brush, and other accessories.
To complement the new cartridges Audio-Technica is also introducing its AT-LH headshells. The new headshells are made from hard-anodized aluminum for maximum rigidity and vibration isolation and are available in three different weights (13, 15 and 18 grams). All feature OFC (Oxygen-Free Copper) cartridge leads and is adjustable for precise setting of azimuth and overhang.
Pricing and Availability
Pricing for the Audio-Technica AT-OC9X Series cartridges is as follows: AT-OC9XSL, US$729.00; AT-OC9XSH, US$649.00; AT-OC9XML, US$549.00; AT-OC9XEN, US$349.00; AT-OC9XEB, US$239.00. The AT-LH18H, AT-LH15H and AT-LH13H headshells are priced at US$89.00. All models are currently available.
One thought on “Audio-Technica to Showcase Its Next-Generation OC9X Series Phono Cartridges at CES 2020”